document number: 94008 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 28-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrafast rectifier, 16 a fred pt ? vs-16CTU04PBF vishay semiconductors features ? ultrafast recovery time ? low forward voltage drop ? 175 c operating junction temperature ? low leakage current ? compliant to rohs directive 2002/95/ec ? designed and qualified for industrial level description/applications fred pt ? series are the state of the art ultrafast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultrafast recovery time. the planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. these devices are intended for use in the output rectification stage of smps, ups, dc/dc converters as well as freewheeling diode in low voltage inverters and chopper motor drives. their extremely optimized stored charge and low recovery current minimize the swit ching losses and reduce over dissipation in the switch ing element and snubbers. product summary package to-220ab i f(av) 2 x 8 a v r 400 v v f at i f 1.3 v t rr typ. see recovery table t j max. 175 c diode variation common cathode anode 13 2 base common cathode 2 common cathode anode to-220ab absolute maximum ratings parameter symbol test conditions values units peak repetitive reverse voltage v rrm 400 v average rectified forward current per leg i f(av) 8 a total device t c = 155 c, rated v r 16 non-repetitive peak surge current i fsm t c = 25 c 100 peak repetitive forward current i frm t c = 155 c, rated v r , square wave, 20 khz 16 operating junction and storage temperatures t j , t stg - 65 to 175 c electrical specifications per leg (t j = 25 c unless otherwise specified) parameter symbol test conditi ons min. typ. max. units breakdown voltage, blocking voltage v br , v r i r = 100 a 400 - - v forward voltage v f i f = 8 a - 1.19 1.3 i f = 8 a, t j = 150 c - 0.94 1.0 reverse leakage current i r v r = v r rated - 0.2 10 a t j = 150 c, v r = v r rated - 20 500 junction capacitance c t v r = 400 v - 14 - pf series inductance l s measured lead to lead 5 mm from package body - 8.0 - nh
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 94008 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 28-apr-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vs-16CTU04PBF vishay semiconductors ultrafast rectifier, 16 a fred pt ? dynamic recovery characteristics per leg (t j = 25 c unless otherwise specified) parameter symbol test conditi ons min. typ. max. units reverse recovery time t rr i f = 1.0 a, di f /dt = 50 a/a, v r = 30 v - 35 60 ns t j = 25 c i f = 8 a di f /dt = 200 a/s v r = 200 v -43- t j = 125 c - 67 - peak recovery current i rrm t j = 25 c - 2.8 - a t j = 125 c - 6.3 - reverse recovery charge q rr t j = 25 c - 60 - nc t j = 125 c - 210 - thermal - mechanical specifications parameter symbol test condit ions min. typ. max. units maximum junction and storage temperature range t j , t stg - 65 - 175 c thermal resistance, junction to case per leg r thjc -3.64 c/w per device - 1.8 2 thermal resistance, junction to ambient r thja typical socket mount - - 50 thermal resistance, case to heatsink r thcs mounting surface, flat, smooth and greased -0.5- weight -2.0- g -0.07- oz. mounting torque 6.0 (5.0) - 12 (10) kgf cm (lbf ?? in) marking device case style to-220ab 16ctu04
vs-16CTU04PBF ultrafast rectifier, 16 a fred pt ? vishay semiconductors document number: 94008 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 28-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - typical forward voltage drop characteristics fig. 2 - typical values of reverse current vs. reverse voltage fig. 3 - typical junction capacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics 1 10 t j = 175 c t j = 150 c t j = 25 c 100 0 0.5 2.5 1.5 1 2 v f - forward voltage drop (v) i f - instantaneous forward current (a) 0.1 0.001 0.01 0.1 1 10 100 1000 0 100 200 300 400 0.0001 v r - reverse voltage (v) i r - reverse current (a) t j = 175 c t j = 150 c t j = 125 c t j = 100 c t j = 25 c t j = 25 c 0 100 200 300 400 1000 100 10 v r - reverse voltage (v) c t - junction capacitance (pf) 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) single pulse (thermal resistance) . . p dm t 1 t 2 notes: 1. duty factor d = t 1 /t 2 2. peak t j = p dm x z thjc + t c 1 d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 94008 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 28-apr-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vs-16CTU04PBF vishay semiconductors ultrafast rectifier, 16 a fred pt ? fig. 5 - maximum allowable case temperature vs. average forward current fig. 6 - forward power loss characteristics fig. 7 - typical reverse recovery time vs. di f /dt fig. 8 - typical stored charge vs. di f /dt note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = rated v r see note (1) square wave (d = 0.50) rated v r applied dc 02468 12 10 180 170 160 150 140 130 i f(av) - average forward current (a) allowable case temperature (c) 02468 12 10 14 8 6 4 2 0 i f(av) - average forward current (a) average power loss (w) rms limit d = 0.01 d = 0.02 d = 0.05 d = 0.1 d = 0.2 d = 0.5 dc 12 10 t rr (ns) 80 60 40 20 90 100 1000 di f /dt (a/s) i f = 16 a i f = 8 a v r = 200 v t j = 125 c t j = 25 c 70 50 30 500 0 100 1000 q rr (nc) di f /dt (a/s) 100 200 300 400 450 i f = 16 a i f = 8 a 50 150 250 350 v r = 200 v t j = 125 c t j = 25 c
vs-16CTU04PBF ultrafast rectifier, 16 a fred pt ? vishay semiconductors document number: 94008 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 28-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 5 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - reverse recovery parameter test circuit fig. 10 - reverse recovery waveform and definitions irfp250 d.u.t. l = 70 h v r = 200 v 0.01 g d s di f /dt adju s t q rr 0.5 i rrm di (rec)m /dt 0.75 i rrm i rrm t rr t b t a i f di f /dt 0 (1) (2) (3) (4) (5) (1) di f /dt - rate of change of current through zero cro ss ing (2) i rrm - peak rever s e recovery current (3) t rr - rever s e recovery time mea s ured from zero cro ss ing point of negative going i f to point where a line pa ss ing through 0.75 i rrm and 0.50 i rrm extrapolated to zero current. (4) q rr - area under curve dened by t rr and i rrm t rr x i rrm 2 q rr = (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 94008 6 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 28-apr-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vs-16CTU04PBF vishay semiconductors ultrafast rectifier, 16 a fred pt ? ordering information table links to related documents dimensions www.vishay.com/doc?95222 part marking information www.vishay.com/doc?95225 2 - current rating (16 = 16 a) 4 - package: 4 t = to-220 3 - circuit configuration: 4 c = common cathode 5 - ultrafast recovery 6 - voltage rating (04 = 400 v) tube standard pack quantity: 50 pieces 1 - vishay semiconductors product 7 - pbf = lead (pb)-free device code 5 1 3 2 4 6 7 vs- 16 c t u 04 pbf
document number: 95222 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 08-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 to-220ab outline dimensions vishay semiconductors dimensions in millimeters and inches notes (1) dimensioning and tolerancin g as per asme y14.5m-1994 (2) lead dimension and fini sh uncontrolled in l1 (3) dimension d, d1 and e do not in clude mold flash. mold flash shall not exceed 0.127 mm (0.005" ) per side. these dimensions are measured at the outermost extremes of th e plastic body (4) dimension b1, b3 and c1 apply to base metal only (5) controlling dimensions: inches (6) thermal pad contour optional within dimensions e, h1, d2 and e1 (7) dimensions e2 x h1 define a zone where stamping and singulation irregularities are allowed (8) outline conforms to jedec to- 220, except a2 (maximum) and d2 (minimum) where dimensions are derived from the actual package outline symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.25 4.65 0.167 0.183 e 10.11 10.51 0.398 0.414 3, 6 a1 1.14 1.40 0.045 0.055 e1 6.86 8.89 0.270 0.350 6 a2 2.56 2.92 0.101 0.115 e2 - 0.76 - 0.030 7 b 0.69 1.01 0.027 0.040 e 2.41 2.67 0.095 0.105 b1 0.38 0.97 0.015 0.038 4 e1 4.88 5.28 0.192 0.208 b2 1.20 1.73 0.047 0.068 h1 6.09 6.48 0.240 0.255 6, 7 b3 1.14 1.73 0.045 0.068 4 l 13.52 14.02 0.532 0.552 c 0.36 0.61 0.014 0.024 l1 3.32 3.82 0.131 0.150 2 c1 0.36 0.56 0.014 0.022 4 ? p 3.54 3.73 0.139 0.147 d 14.85 15.25 0.585 0.600 3 q 2.60 3.00 0.102 0.118 d1 8.38 9.02 0.330 0.355 ? 90 to 93 90 to 93 d2 11.68 12.88 0.460 0.507 6 13 2 d d1 h1 q 13 2 c c d d 3 x b2 3 x b (b, b2) b1, b3 (h1) d2 detail b c a b l e1 lead tip e e2 ? p 0.014 a b m m 0.015 a b mm s eating plane c a2 a1 a a a lead assignments diode s 1. - anode/open 2. - cathode 3. - anode conforms to jedec outline to-220ab (6) (6) (7) (6) (7) e 2 x l1 (2) detail b s ection c - c and d - d view a - a ba s e metal plating (4) (4) c1 c (6) thermal pad (e) e1 (6)
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
